GEAR DRIVE TW26 CAM
488,09 €
Kuumakse alates 17.63€, valides makseviisiks ESTO järelmaks.
Paindlik tarne
DPD, Omniva, Itella
Grind Cam
- Andrews Products grinds its cams with the help of a computer with cam design capabilities. This superior technology gives the utmost in both performance and reliability. Only the best alloy steel billets and heat-treating processes are utilized. Furthermore, the power in Harley's Twin Cam engine can be made even more convincing when superior Andrews computer-designed high-performance cams are installed.
- Cams work well with fuel injection or carburetor models
- Run best with low restriction exhausts (1700-5200 rpm)
- Works well with carbs or fuel injection
- Bolt-in cam for more torque with stock compression
- Can be used with stock valve springs and tappets
- Similar to the EV-23 cam
- All Andrews gear-driven cams require four-gear set for installation (DS-199532 for 99-06 applications; 0925-0166 or 0925-0152 for 07-17 Twin Cam and 06 Dyna applications).
- Chain Driven Cams: 00-06 model cams use a splined cam drive sprocket. These cams will fit in the 1999 Twin Cam motor, but the splined cam drive sprocket OEM #25716-99 or DS-199175 must be used.
- Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance.
- 59G, 60G and 64G cams are for highly tuned engines and require the knowledge of an expert engine builder for proper setup and installation.
- NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES.
Bolt-in cam for lower RPM torque on heavier bikes For two-up touring Good power from 1800-5500 RPM Can be used wit stock springs and tappets Works well with carbs or fuel injection
EXHAUST DURATION | 266° |
EXHAUST LIFT | 0,490" |
INTAKE DURATION | 226° |
INTAKE LIFT | 0,490" |
APPLICATION | Exhaust| Intake |
EXHAUST CLOSE | 9° |
EXHAUST OPEN | 41° |
INTAKE CLOSE | 35° |
INTAKE OPEN | 11° |
TYPE | Gear |
UNITS | Pair |
PRODUCT NAME | Cam Kit |
EXHAUST LIFT AT TDC | 0,120" |
GRIND | 26 Series |
EXHAUST LOBE CENTERLINE | 106° |
INTAKE LOBE CENTERLINE | 102° |
INTAKE LIFT AT TDC | 0,138" |
Tootja | ANDREWS |
---|---|
Saadavus | Tehase tellimus |
Tarnija tootekood | 288126G |
Outlet, lõpumüük | Ei |
Tarneaeg | kuni 90 tööpäeva |
Write Your Own Review