Special tool for loosening the freewheel at the pedal crank. A stuck freewheel can be easily pulled off with this practical tool.
The freewheel remover from swiing is made of solid, gas-nitrided and hardened steel. The wide version is suitable for freewheels with 16 to 22 teeth.
Application:
Push the freewheel remover over the wheel axle so that the two pins engage in the groove in the freewheel. The special tool needs to be pressed against the freewheel by using the wheel nut. The freewheel can now be loosened easily with a spanner. To completely dismantle the freewheel, the wheel nut must be unscrewed again.
Dimensions:
The freewheel remover from swiing is made of solid, gas-nitrided and hardened steel. The wide version is suitable for freewheels with 16 to 22 teeth.
Application:
Push the freewheel remover over the wheel axle so that the two pins engage in the groove in the freewheel. The special tool needs to be pressed against the freewheel by using the wheel nut. The freewheel can now be loosened easily with a spanner. To completely dismantle the freewheel, the wheel nut must be unscrewed again.
Dimensions:
- Diameter of the hole for wheel axle: 12.2mm
- Width of pins: 6mm
- Wrench width: 21mm
